Wednesday, November 6, 2013
Mitsubishi L300 engine inspection procedure
POWER STEERING oil pump drive BELT tension check and adjustment: the tip of the Finger, lightly tap the central belt between pulleys location appears in the direction of the arrow, and then measure the belt vibration frequency. Spread between the location of the arrow on the image as a means of pressure 98N pulleys and then measure the deflection.
AIR CONDITIONING COMPRESSOR DRIVE BELT TENSION CHECK AND ADJUSTMENT. (1) loosen the tension pulley mounting nut. 2. adjust the belt tension adjustment bolt. (3) tighten the retaining nut. (4) check the belt deflection and the tension and adjust as necessary. Warning check the crankshaft once or more in a clockwise direction. Check the ignition timing is a constant value. A fixed value. Before the inspection, the inspection of the vehicle preceding the set condition. Replace the three-way catalyst for CO contents do not contain the fixed value even if the control result is normal al items. Three-way Union attach vacuum hose fuel pressure regulator and air conditioning intake session and connect the vacuum gauge.
