Wednesday, November 6, 2013
1993-95 Mazda RX-7 Turbo system installation manual PowerMax
Thank you for purchasing the XS Engineering PowerMax system 1993-95 Mazda RX-7 (where can I). This system is designed for the XS engineering research and development team to complete the RX-7 is still in support of the agile platform by adding a healthy dose of raw materials to the turbocharged power! By utilizing Mazda's powerful 1.3-liter rotary engine 13B-REW XS Engineering bends the laws of physics, once again, by designing one of the turbo system, which gives the immediate momentum of the answer and 368 Dynojet-proven horsepower wheels only 13.5 PSI! In addition to this, please take the time to read through and understand this manual completely before you proceed with the installation.
In The Preparation Of The
Remember, running a turbocharger setup the correct conversion to a single turbocharger, one is not an easy task. This is the reason why only experienced professionals to install the turbocharger system. In addition, we recommend that the turbocharger system can be installed only on engines that are in good condition. Please check the following:
1. the Cooling system to make sure that this is or better than the factory settings.
2. the ignition system to make sure that it does not contain or better than factory settings and the ignition timing is in stock.
3. fuel supply system, make sure that the fuel pump, fuel filter and fuel injectors all work inside the factory settings. Also, make sure that the spent fuel is at least 91 octane or higher.
4. engine compression within the engine compression is factory specifications.
